Representative product-family image. Contact Darius to confirm the exact model visual.
What this product is designed to do
CC/CV multi-process inverter power source for MIG/MAG and the additional processes listed in the brochure. XuperMIG is described for sheet-metal fabrication, steel construction, repair and maintenance.
Product details
- Input supply: 353-478 VAC, three-phase, 50/60 Hz.
- Maximum input: 16.8 kVA.
- Current at 60% duty cycle: 400 A; at 100% duty cycle: 310 A.
- Protection class: IP23.
- Wire feeder: 0.8-1.6 mm wire diameter; PMDC SSJ11 motor; 2/4-roll drive; wire speed 0.8-22 m/min.
- Brochure feeder dimensions: 215 x 550 x 290 mm; feeder weight: approximately 10 kg.
Key product points
- MIG/MAG-oriented CC/CV inverter with MMA and TIG capability listed in the equipment table.
- The power-source table lists 400 A at 60% duty cycle and 310 A at 100% duty cycle.
- Compatible wire feeder specification is included in the supplied brochure; water cooling is described as optional.
Where to use
- Sheet-metal fabrication and steel construction.
- Repair and maintenance using compatible solid and cored wires, subject to process and consumable selection.
- Welding suitable mild-steel, alloy-steel, stainless-steel and aluminium wires as supported by the current model manual.
Practical checks before the job
- Confirm the work material, required welding process, joint design, position, duty cycle and production requirement before selecting the power source.
- Verify input voltage, phase, frequency, earthing, circuit protection and site electrical capacity against the exact machine nameplate and current manufacturer manual.
- Select compatible torches, electrode holders, wire feeders, cables, cooling equipment and consumables as specified for the selected model.
- Use the approved welding procedure (WPS), correct consumable, shielding gas or flux where applicable, and the specified current, voltage and wire-feed settings.
- Use trained personnel and suitable PPE, fume extraction, fire prevention and electrical isolation. Inspect connections and equipment before use and follow the manufacturer maintenance schedule.
Selection check: Confirm the exact machine version, current manufacturer TDS/manual, supply characteristics, process compatibility, accessories, duty cycle and India availability with Darius before ordering. Do not rely on brochure dimensions or weights where the brochure tables differ.
This guide supports product discovery and enquiry preparation. It is not a full operating instruction, welding procedure or installation specification. Confirm the exact grade, substrate, operating conditions and latest manufacturer technical and safety data sheets. Follow the approved site procedure and engineering approval where applicable.