Open a group to review available grades, product highlights and typical applications.
Use only for compatible aluminium grades and applications. Remove oxide and contamination immediately before welding, use dedicated clean tools, and confirm alloy/temper compatibility, joint design and current product procedure.
1 product modelsView productsUse brazing products where a filler joins compatible parts without melting the parent components. Confirm filler/flux pair and joint clearance; clean and assemble the joint, heat parent metals evenly and follow the product-specific cooling and post-cleaning instructions. Do not treat one flux or rod as universal.
9 product modelsView productsUse for repair, joining or build-up of compatible grey, nodular, ductile or other cast irons. Identify the casting type and condition, remove oil/contamination, assess restraint and cracking risk, and follow the exact product method for heat input, bead length, peening and cooling.
7 product modelsView productsUse for compatible copper and bronze components, including marine, pump and high-friction equipment. Identify the copper alloy and joining partner; clean thoroughly and confirm heat input, preheat and post-weld finishing from the exact product instructions.
2 product modelsView productsUse to restore or protect surfaces exposed to abrasion, impact, pressure, metal-to-metal friction, elevated temperature or cavitation. Identify the dominant wear mechanism first; some jobs need a buffer/build-up layer before the final wear layer. Check substrate crack sensitivity and approved pass sequence.
16 product modelsView productsUse continuous hardfacing wires for semi-automatic or automated wear-overlay work. Check wire type (self-shielded or gas-shielded), equipment, polarity, shielding gas, substrate and approved operating window; plan buffer layers and overlay pattern around wear mechanism and component geometry.
10 product modelsView productsUse joining wires for gas-shielded MIG/MAG joining of compatible base materials. Confirm material family, shielding gas, wire diameter, transfer mode and polarity from the exact wire data sheet and qualified procedure.
1 product modelsView productsUse this subcategory to prepare or open metal before repair welding. Identify the defect and base metal first; clean the area, use suitable extraction and PPE, and follow the exact electrode instructions and qualified procedure for the power source and technique.
1 product modelsView productsUse where corrosion resistance, heat resistance or compatibility with a stainless grade is important. Identify the stainless grade and service medium; avoid cross-contamination from carbon-steel tools and confirm filler compatibility and cleaning/passivation requirements.
3 product modelsView productsUse this range for joining compatible structural, low-alloy, higher-strength, hardenable or dissimilar steels. Confirm steel grade, thickness, restraint and service conditions; use the product-specific WPS for preheat, interpass temperature, polarity, current and any post-weld treatment.
7 product modelsView products